View D3202_4799623.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Telecom-, Signal and RF Relays
AXICOM
FX2 Relay
108-98003 * Apr. 10 Rev. G * ECOC: JM10
AXICOM
Telecom-, Signal and RF Relays
108-98003 Rev. G
FX2 Relay
Disclaimer
While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this datasheet, Tyco Electronics does not guarantee that it is error-free, nor does Tyco Electronics make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. Tyco Electronics reserves the right to make any adjustments to the information contained herein at any time without notice. Tyco Electronics expressly disclaims all implied warranties (and all express warranties, except as otherwise stated in this datasheet) regarding the information contained herein, including but not limited to any implied warranties or merchantability or fitness for a particular purpose. It is recommended that you test any new or replacement product before incorporating into a system. The dimensions in this datasheet are for reference purpose only and are subject to change without notice. Specifications are subject to change without notice.
Index
Dimensions Coil Operating Range Coil Data and Ordering Information Contact Data Insulation General Data Packing 4 5 6 7 8 8 9 2 of 11
UL 508 File No. E 111441 UL 60950 IEC/EN60950 IEC Ref. Cert. No. CH-3269
All specifications subject to change. Consult Tyco Electronics for latest specifications.
AXICOM
Telecom-, Signal and RF Relays
108-98003 Rev. G
FX2 Relay
2 pole telecom / signal relay Through Hole Type (THT) Polarized, latching or non-latching 1 coil Relay types: sensitive non lachting version with 1 coil high sensitive non latching version with 1 coil, latching with 1 coil
ROHS compliant (Directive 2002/95/EC) as per product date code 0342 / halogen free.
Features
* * * * * * * * Telecom/signal relay (dry circuit, test access, ringing) Slim line 15 x 7.3 mm, 0.590 x 0.287 inch Switching current 2 A 2 changeover contacts (2 form C / DPDT) Bifurcated contacts High sensitivity results in low nominal power consumption 80 mW for high sensitive, 140 mW for sensitive version High dielectric characteristic 1800 Vrms also between open contact High surge capability (1.2 / 50 s and 10 / 700 s) meets Telcordia GR 1089 and FCC Part 68 2500 V between open contacts 3500 V between coil and contacts High mechanical shock up to 300 G functional up to 1500 G survival Hermetically sealed (RT V)
* *
Typical applications
* Communications equipment linecard application - analog, ISDN, xDSL, PABX Voice over IP * Office and business equipment * Measurement and control equipment * Consumer electronics Set top boxes, HiFi * Medical equipment
Insulation category
Supplementary insulation according Working voltage Mains supply voltage Repetitive peak voltage Pollution degree Flammability classification Maximum operating temperature IEC / EN 60950 300 Vrms 250 Vrms 2500 V Internal: 1 External: 2 V-0 85 C
All specifications subject to change. Consult Tyco Electronics for latest specifications.
3 of 11
AXICOM
Telecom-, Signal and RF Relays
108-98003 Rev. G
FX2 Relay Dimensions
THT mm L W H T T1 T2 Tw S 14.95 0.05 7.30 0.05 10.70 0.05 3.30 0.30 N/A 5.08 0.15 0.50 0.30 0.05 inch 0.588 0.002 0.287 0.002 0.421 0.002 0.129 0.012 N/A 0.199 0.006 0.019 0.012 0.002
Dimensions in mm
THT Version
Mounting hole layout
View onto the component side of the PCB (top view)
Terminal assignment
Relay - top view
Non-latching type
not energized condition
Latching type, 1 coil
reset condition
Contacts in reset position. Contact position might change during transportation and must be reset before use.
All specifications subject to change. Consult Tyco Electronics for latest specifications.
4 of 11
AXICOM
Telecom-, Signal and RF Relays
108-98003 Rev. G
FX2 Relay Coil Operating Range
80 mW 140 mW 200 mW Umax. at 0 A Umax. at 2 x 1 A Umax. at 2 x 2 A
3.4 3.2 3 2.8 2.6
Unom = Umax. = Uop. min. = Urel. min. =
Coil Voltage [U/Unom]
2.4 2.2 2 1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 0 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120
Nominal coil voltage Upper limit of the operative range of the coil voltage (limiting voltage) Lower limit of the operative range of the coil voltage (reliable operate voltage) For latching relays Uset min. resp. Ureset min. Lower limit of the operative range of the coil voltage (reliable release voltage)
Unom. nominal coil voltage
Uop. min. Urel. min.
Ambient Temperature [C]
2.6 2.4 2.2 2.0
260 mW 300 mW Umax. at 0 A Umax. at 2 x 1 A Umax. at 2 x 2 A
Coil Voltage [U/Unom]
1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120
Unom. nominal coil voltage
Uop. min. Urel. min.
Ambient Temperature [C]
4.4 4.2 4 3.8 3.6 3.4 3.2
100 mW Latching
Coil Voltage [U/Unom]
3 2.8 2.6 2.4 2.2 2 1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 0 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50
Umax. - 100 % coil duty at 0 A Umax. - 5 % coil duty at 2 x 2 A Umax. - 5 % coil duty at 2 x 1 A Umax. - 5 % coil duty at 0 A Unom. nominal coil voltage
Uset min.
Ambient Temperature [C]
60 70 80 90 100 110 120 130 140
All specifications subject to change. Consult Tyco Electronics for latest specifications.
5 of 11
AXICOM
Telecom-, Signal and RF Relays
108-98003 Rev. G
FX2 Relay Coil Data (values at 23 C)
Nominal voltage Unom Operate/set voltage range Release/ reset voltage Minimum Coil power
Ordering Information
Coil Resistance Relay code Tyco part number
Minimum voltage Umin Vdc Vdc
Maximum voltage Umax Vdc Vdc mW / 10 %
Standard Version
Non-Latching, 1 coil 3 4 4.5 5 6 9 12 24 48 2.10 2.80 3.15 3.50 4.20 6.30 8.40 16.80 33.60 6.30 8.40 9.40 10.50 12.60 18.90 25.20 42.20 68.90 0.30 0.40 0.45 0.50 0.60 0.90 1.20 2.40 4.80 140 140 140 140 140 140 140 200 300 64 114 145 178 257 574 1028 2880 7680 D 3206 D 3207 D 3204 D 3209 D 3205 D 3210 D 3202 D 3212 D 3213 1462034-6 1462034-8 1462034-2 1462034-9 1462034-5 1-1462034-3 1462034-1 1-1462034-4 1-1462034-5
High Sensitive Version
Non-Latching, 1 coil 3 4.5 5 6 9 12 24 48 2.25 3.38 3.75 4.50 6.75 9.00 18.00 36.00 8.30 11.10 12.50 13.90 16.70 33.40 50.40 70.00 0.30 0.45 0.50 0.60 0.90 1.20 2.40 4.80 80 80 80 80 80 80 140 260 113 353 313 450 1013 1800 4114 8882 D 3221 D 3222 D 3223 D 3224 D 3225 D 3226 D 3227 D 3228 1-1462034-9 2-1462034-0 2-1462034-1 2-1462034-2 2-1462034-3 2-1462034-4 2-1462034-5 2-1462034-6
Standard Version
Latching, 1 coil 3 4.5 5 6 9 12 24 2.25 3.38 3.75 4.50 6.75 9.00 18.00 7.50 11.20 12.40 14.90 22.40 29.80 48.70 -2.25 -3.38 -3.75 -4.50 -6.75 -9.00 -18.00 100 100 100 100 100 100 150 90 203 250 360 810 1440 3840 D 3241 D 3242 D 3243 D 3244 D 3245 D 3246 D 3247 2-1462034-8 2-1462034-9 3-1462034-0 3-1462034-1 3-1462034-2 3-1462034-3 3-1462034-4
High-Dielectric Version
Non-Latching, 1 coil 3 2.25 6.30 0.30 200 45 D 3291 6-1462034-6
Further coil versions are available on request.
All specifications subject to change. Consult Tyco Electronics for latest specifications.
6 of 11
AXICOM
Telecom-, Signal and RF Relays
108-98003 Rev. G
FX2 Relay Contact Data
Number of contacts and type Contact assembly Contact material Limiting continuous current at max. ambient temperature Maximum switching current Maximum swichting voltage Maximum switching capacity Thermoelectric potential Minimum switching voltage Initial contact resistance / measuring condition: 10 mA / 20 mV Electrical endurance CC0 contact category 0 ( 30 mV / 10 mA) at cable load open end at 24 V / 1.25 A at 125 V / 0.24 A at 30 V / 2 A 2 changeover contacts Bifurcated contacts Palladium-ruthenium - gold covered 2A 2A 220 Vdc 250 Vac 60 W, 62.5 VA < 10 V 100 V < 70 m min. 2.5 x 106 operations min. 2.0 x 106 operations min. 5 x 105 operations min. 5 x 105 operations min. 5 x 105 operations typ. 108 operations 220 Vdc / 0.24 A - 60 W 125 Vdc / 0.24 A - 30 W 250 Vac / 0.25 A - 62.5 VA 125 Vac / 0.5 A - 62.5 VA 30 Vdc / 2 A - 60 W
Mechanical endurance UL contact ratings
Max. DC Load Breaking Capacity
DC Voltage [Vdc]
resistive load
DC current [A]
All specifications subject to change. Consult Tyco Electronics for latest specifications.
7 of 11
AXICOM
Telecom-, Signal and RF Relays
108-98003 Rev. G
FX2 Relay Insulation
Standard Version Insulation resistance at 500 Vdc Dielectric test voltage (1 min) between coil and contacts between adjacent contact sets between open contacts Surge voltage resistance according to Telcordia GR 1089 (2 / 10 s) between coil and contacts between adjacent contact sets between open contacts according to FCC 68 (10 / 160 s) and IEC (10 / 700 s) between coil and contacts between adjacent contact sets between open contacts 1800 Vrms 1800 Vrms 1800 Vrms > 109 4000 Vrms 1500 Vrms 1500 Vrms High Dielectric Version
3500 V 2500 V 2500 V 3500 V 2500 V 2500 V
6000 V 2000 V 2000 V 6000 V 2000 V 2000 V
High Frequency Data
Capacitance between coil and contacts between adjacent contact sets between open contacts RF Characteristics Isolation at 100 MHz / 900 MHz Insertion loss at 100 MHz / 900 MHz V.S.W.R. at 100 MHz / 900 MHz max. 4 pF max. 2 pF max. 2 pF - 34.0 dB / - 15.1 dB - 0.03 dB / - 0.60 dB 1.07 / 1.45
General Data
Operate time at Unom typ. / max. Reset time (latching) atUnom , typ. / max. Duration of set / reset pulse (latching) min. Release time without diode in parallel (non-latching), typ. / max. Release time with diode in parallel (non-latching), typ. / max. Bounce time at closing contact, typ. / max. Maximum switching rate without load Ambient temperature Thermal resistance Maximum permissible coil temperature Vibration resistance (function) Shock resistance, half sinus, 11 ms Degree of protection / Environmental protection Needle flame test Mounting position Processing information Weight (mass) Terminal surface Resistance to soldering heat All data refers to 23 C unless otherwise specified.
All specifications subject to change. Consult Tyco Electronics for latest specifications.
3 ms / 4 ms 3 ms / 4 ms 20ms* 1 ms / 3 ms 3 ms / 4 ms 1 ms / 5 ms 50 operations/s -55 C ... +85 C < 165 K/W 125 C 20 G 10 to 500 Hz 50 G (function) 1500 G (damage) immersion cleanable, IP 67 / RT V application time 20 s, no burning any Ultrasonic cleaning is not recommended max. 2.5 g SnCu 0.7 265 C / 10 s
* Duration may be shorter depending on pulse shape, voltage applied and ambiente temperature
8 of 11
AXICOM
Telecom-, Signal and RF Relays
108-98003 Rev. G
FX2 Relay Packing
Stick dimension
Tube for THT version 50 relays per stick 1`000 relays per box
Dimensions in mm
All specifications subject to change. Consult Tyco Electronics for latest specifications.
9 of 11
AXICOM
Telecom-, Signal and RF Relays
108-98003 Rev. G
FX2 Relay
IM Relays
4th generation slim line - low profile polarized 2 c/o telecom signal relay with bifurcated contacts, available as non latching or latching relay with 1 coil. Nominal voltage range from 1.5 ... 24 V, coil power consumption of 50 ... 200 mW, latching relays with 1 coil 100 mW. The IM relay is available as through hole and surface mount type (J-Legs and Gull Wings) and capable to switch loads up to 60 W/62,5 VA. It is currently the only 2 A rated 4G relay on the market. Dielectric strength fulfills the Telcordia requirements according GR 1089 (2,5 kV - 2 / 10 s) and FCC part 68 (1,5 kV - 10 / 160 s). The IM relay is tested according CECC/IECQ and certified in accordance with IEC/EN 60950 and UL 60950. Dimensions approx. 10 x 6 mm board space and 5.65 mm height.
D2n Relays
2nd generation non polarized 2 c/o relay for telecom and various other applications. Nominal voltage range from 3 ... 48 V, coil power consumption from 150 .... 500 mW. The D2n relay is capable to switch currents up to 3 A. Dielectric strength fulfills the requirements according FCC part 68 (1,5 kV - 10 / 160 s). Dimensions approx. 20 x10 mm board space and 11 mm height.
P1 Relays
Extremely sensitive, polarized 1 c/o relay with bifurcated contacts for a wide range of applications, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power consumption 65 mW, latching relays with 1 coil 30 mW. The P1 relay is available as through hole or surface mount type and capable to switch currents up to 1 A. Dielectric strength fulfills the requirements according FCC part 68 (1,5 kV - 10 / 160 s). Dimensions approx. 13 x 7,6 mm board space and 7 mm height for THT or 8 mm height for SMT version.
P2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power consumption 140 mW, latching relays with 1 coil 70 mW. The P2 Relay is available as through hole or surface mount type and capable to switch currents up to 5 A. Dielectric strength fulfills the Telcordia requirements according GR 1089 (2,5 kV - 2 / 10 s) and FCC part 68 (1,5 kV - 10 / 160 s). The P2 relay is tested according CECC/IECQ and certified in accordance with IEC/EN 60950 and UL 60950. Dimensions approx. 15 x 7,5 mm board space and 10 mm height.
W11 Relays
Low cost, non polarized 1 c/o relay for various applications. Nominal voltage range from 3 ... 24 V, coil power consumption 450 mW, sensitive versions 200 mW. The W11 relay is capable to switch currents up to 3 A. Dielectric strength 1000 Vrms. Dimensions approx. 15,6 x 10,6 mm board space and 11,5 mm height.
FX2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 coil. Nominal voltage range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the high sensitive version, 140... 300 mW for the standard version, latching relays with 1 coil 100 mW. The FX2 relay is available as through hole type and capable to switch loads up to 60 W/62,5 VA. Dielectric strength fulfills the Telcordia requirements according GR 1089 (2,5 kV - 2 / 10 s) and FCC part 68 (1,5 kV - 10 / 160 s). The FX2 relay is tested according CECC/ IECQ and certified in accordance with IEC/EN 60950 and UL 60950. Dimensions approx. 15 x 7,5 mm board space and 10,7 mm height.
Reed Relays
High sensitive, non polarized relay for telecom and various other applications, available with 1 n/o, 2 n/o or 1c/o contacts. Nominal voltage range from 5 ... 24 V, coil power consumption 50...280 mW for 1 n/o and 125 ... 280 mW for 2 n/o or 1 c/o versions. Reedrelays are available in DIP or SIL housing and capable to switch currents up to 0,5 A. Integrated diode and/or electrostatic shield optional. Dielectric strength 1500 Vdc. Dimensions approx. 19,3 x 7 mm board space and 5 ... 7,5 mm height for DIP or 19,8 x 5 mm board space and 7,8 mm height for SIL version.
FT2 / FU2 Relays
3rd generation non polarized, non latching 2 c/o telecom relay with bifurcated contacts. Nominal voltage range from 3 ... 48 V, coil power consumption 200 ... 300 mW. Most sensitive 48 V relay. Available as through hole and surface mount type. Dielectric strength fulfills the Telcordia requirements according GR 1089 (2,5 kV - 2 / 10 s) and FCC part 68 (1,5 kV - 10 / 160 s). The FT2/FU2 relay is tested according CECC/IECQ and certified in accordance with IEC/EN 60950 and UL 60950. Dimensions approx. 15 x 7,5 mm board space and 10 mm height.
Cradle Relays
Extremely reliable and mature relay family of 1st generation for various signal switching applications. Available as non polarized, polarized / latching and relay with AC coil. The benefit is the possibility of combining various contact sets from 1 up to 6 poles, single and bifurcated contacts, different contact materials with a coil voltage range from 1,5 Vdc to 220 Vac. Cradle relays are available as dust protected and hermetically sealed versions, with plug in or solder terminals and are capable to switch currents up to 5 A. Forcibly guided (linked) contact sets optional. Dielectric strength 500 Vrms. Dimensions from approx. 19 x 24 to 19x35 mm board space and 30 mm height.
FP2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the high sensitive version, 140... 300 mW for the standard version, latching relays with 1 coil 100 mW.. The FP2 Relay is available as through hole type and capable to switch loads up to 60 W/62,5 VA. Dielectric strength fulfills FCC part 68 (1,5 kV - 10 / 160 s). The FP2 is tested according CECC/IECQ approved. Dimensions approx. 14 x 9 mm board space and 5 mm height.
Other Relays
We offer a variety of different relay families for maintenance and replacement purposes. These relays are up to 50-plus years old now, such as Card Relay SN (V23030 series), Small General Purpose Relay (V23006 series), Small Polarized Relay (V23063 ... V23067 and V23163 ... V23167 series). Accessories like sockets, hold down springs, etc. optional.
High Frequency Relays
HF3 / HF3S / HF6 series RF relays offering excellent RF characteristics in a small package. All HF series relays are suitable for SMD soldering processes. Available as non latching or latching versions with 1 or 2 coils and a nominal coil voltage range from 3 ... 24 V, a coil power consumption of 140 mW or 70 mW (single coil latching types). HF3: Low cost RF relay suitable up to 3 GHz. Impedance 50 and 75 Ohm. 50 W hot switching and 50 W RF power carry capability. Dimensions 14.6 x 7.3 x 10.3 mm. HF3S: High performance, high power RF relay suitable up to 3 GHz, 50 W hot switching and 150 W RF power carry capability. Dimensions 15 x 7.6 x 10.6 mm. HF6: High performance, high power RF relay suitable up to 6 GHz, 50 W hot switching and 50 W RF power carry capability. Dimensions 15 x 7.6 x 10.6 mm.
MT2
2nd generation non polarized, non latching 2 c/o telecom and signal relay with bifurcated contacts. Nominal voltage range from 3 ... 48 V, coil power consumption 150/200/300/400 and 550 mW. Dielectric strength fulfills the requirements according FCC part 68 (1,5 kV - 10 / 160 s). Dimensions approx. 20 x 10 mm board space and 11 mm height.
All specifications subject to change. Consult Tyco Electronics for latest specifications.
10 of 11
Tyco Electronics Logistics AG Werk Axicom Au Seestrasse 295 CH-8804 Au-Wadenswil / Switzerland Phone +41 44 782 91 11 Fax +41 44 782 90 00 E-mail: axicom@tycoelectronics.com
Tyco Electronics Paulsternstrasse 32 D-13629 Berlin / Germany Phone +49 30 386 38573 Fax +49 30 386 38575 E-mail: axicom@tycoelectronics.com
Tyco Electronics EC Trutnov s.r.o. Komenskeho 821 CZ-541 01 Trutnov / Czech Republic E-mail: axicom@tycoelectronics.com
Telecom-, Signal and RF Relays
AXICOM
Tyco Electronics Corporation POB 3608, Harrisburg, PA 17105, USA Phone +1 800-522-6752

▲Up To Search▲

Price & Availability of D3202

	To Download D3202 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .